Your search returned 316 items.
Attached you can find a PowerFactory project containing several generic models for main transformers and generators.…
Tags
PowerFactory is able to calculate single-phase interruptions within the short-circuit calculation (complete method) and in the transient simulation. Another option is to connect a three phase line via…
Tags
A common application for BESS consists in replacing the spinning reserve/primary reserve in a power system. This application becomes significantly important in small or island power systems with…
In the attached example, a 20Mvar STATCOM provides dynamic reactive power compensation for a set of motors connected to a weak network. The study case "Fault Stability Simulation (RMS)" shows the…
Tags
The voltage dependence is defined in the load type (TypLod). Therefore a load type has to be defined in a first step. In its Load Flow tab, the voltage dependence can be configured for active and…
Tags
PowerFactory provides a built-in functionality to adapt the power of selected loads to result in the measured values at the beginning of a feeder. Using the attached example, the following steps…
In the attached example a random signal is generated using the sample and hold noise generator (ElmNoise) within a DSL model. The generated random signal is defined to change every 1/Frequency…
The slots in the standard frames are predefined slots for the different elements a synchronous machine controller may have, i.e., the voltage regulator, the power system stabilizer, etc. The names of…
A Technical Reference for the doubly fed induction machine is available in the PowerFactory Help menu under Technical Reference.…
Tags
The polarity field is used to correct or adjust the proximity of the ends of coupled lines in the case that they have been incorrectly defined. When the user draws lines in PowerFactory, the i and j…
Tags