Your search returned 50 items.
In the attached example (FixedSpeedWTG.pfd) an induction generator with the necessary dynamic models is shown. The reactive power is balanced using a switched capacitor. The dynamic models are a shaft…
The attached example (WindCpLambda.pfd) visualises the aerodynamic efficiency cp of the wind turbine, which can be found in the DFIG (doubly fed induction generator) template. Here the cp-lambda…
Tags
The attached document contains a step by step guide for the usage of the script "Wind Speed Sweep" in other projects.…
Tags
Refer to the attached example. It describes an induction generator with the necessary dynamic models. The reactive power is balanced using a switched capacitor. The dynamic models are a shaft model…
Tags
A PowerFactory 2018 (and onwards) example along with two papers is provided for your reference. An example of a PowerFactory implementation of a fast voltage controlled based method for converter…
A power electronic converter, used in photovoltaic, wind power or HVDC application for example, has a frequency-dependent equivalent impedance, which depends on controller design and physical…
The Q(V) characteristic is available as reactive power controller for load flow calculation within the generator models as well as within the station controller. The slope of the control curve can be…
Refer to attached example. It contains an IBR model and a three-phase fault is simulated in both RMS and EMT. The IBR model can operate in both RMS and EMT, whereas in EMT it can be changed from an…
The attached project demonstrates the behaviour of a full-scale converter based system while subjected to an islanding event. The converter is implemented in PowerFactory using a static generator…
Since version 2017 a new module for scanning the simulation is available. Attached an example how the Fault Ride Through simulation scan can be used. The project contains two study cases, in the first…
Tags