Your search returned 316 items.
A neutral earthing compensator (NEC) or neutral earthing resistor (NER) is modelled in PowerFactory as an element that needs no type. The rated voltage, rated current, zero sequence and zero sequence…
Tags
In the attached example project the battery is connected to the grid using a PWM converter. The grid contains a synchronous machine which supplies a load. After the initialization the synchronous…
The attached example shows how to use the PV System. In this example the Solar Calculation is shown. - As a type for the PV System element a PV Panel type is chosen. The rated Peak Power in the Panel…
Tags
Refer to the attached project. An example of a photovoltaic (PV) system running in parallel with a synchronous generator is provided. The PV generator (Static Generator) is feeding the load. The grid…
For synchronising a synchronous generator to a power network you need to consider the following: The flag spinning in isolated operation (load flow page) should be enabled. Otherwise the synchronous…
PowerFactory fully supports all kinds of unbalanced power system models: - 3phase, 3 wire (loads in Delta, can be unbalanced, lines can be unbalanced) - 3phase, 4 wire (neutral is modelled…
Tags
In some special cases values of element parameters, e.g. the base apparent power, can be transferred from the element, e.g. synchronous machine, to the control models so it is not necessary to insert…
Tags
An example of Smart grid project based on PowerFactory is the ERDF (French DNO) LINKY Project. ERDF "LINKY" project aims at creating value from the large amount of data from smart meters in terms of…
Tags
You try to connect a power or current measurement device (StaPqmea or StaImea) but you get the message: "Selected Object NodeName 'Terminal' is not a 'Cubicle'". You have to select in this case on the…
Tags
A simple test system is provided in order to analyse using Quasi-Dynamic Simulation the behaviour of a microgrid containing PV systems and a battery system. The network can be configured in order to…
Tags