Your search returned 316 items.
Normally, when you access a variable in PowerFactory, the result of the DPL query is the value as entered in the element dialogue, e.g. oLoad:plini (the active power of a load). To access the actual…
Tags
The attached project includes a DPL script that writes a result file. The result object is defined inside the DPL command. The scaling factor of the loads is changed between 0 and 1, a load flow…
The attached project includes a DPL script that writes a result file and then export it into a comma separated values (csv) file. The result object is defined inside the DPL command. The scaling…
For custom colouring there are two possibilities: Text colour of text boxes depending on IF-condition. For example if P>10 then colour the active power value in the result box of the line red: #.## #…
Tags
Attached is an example (ExampleTCSC.pfd) of a Thyristor Controlled Series Capacitor (TCSC) including a control for power oscillation damping (POD) to be used with RMS simulations.…
For load -flow analysis enter the synchronous machine as a voltage source, using the steady-state impedances (Xd) and the magnitude of the no-load voltage. This represents the behaviour of the…
Tags
The active and reactive power settings are the combined power of stator and rotor. When setting the machine to Generator on the Basic Options page, the machine is in generator-orientation and a…
Tags
In the attached example (PhotovBattery.pfd ) two explicit modelling approaches are shown. The models we recommend for PowerFactory simulations are very similar to each other. The PV generator consists…
Tags
The unit is machine p.u. (rated power and rated voltage of the corresponding machine). This parameter is only used in IEC short circuit calculations.…
Tags
Attached you can a PowerFactory project containing the investigation for VDEW compliance of an asynchronous generator (Example 1) and an inverter-fed synchronous machine (Example 2)…