Your search returned 202 items.
During the simulation of an Functional Mock-up Unit (FMU) generated from Matlab Simulink in PowerFactory the simulation start time needs to be set to zero (start time [attribute tstart] in the page…
Tags
Refer to the attached project. The options shown are: Direct start with star-delta switching: Parameter i_star = 1 (Star), i_star = 0 (Delta) Additional rotor resistance: signal rradd (can also be…
The attached example includes the VSD_200kW template representing a variable speed drive driving a 200 kW motor. The example provides multiple study cases: SC01 - Motor started (no re-acc) - RMS SC02…
Tags
Refer to the ]attached example for a measured voltage at a bus bar. The inputs of the voltage source are named U_A, U_B, U_C, as you can see in the composite model. These inputs represent the…
Tags
It is possible to use the results of the Prony Analysis in a DSL model in order to generate a synthetic time domain curve as a summation of all resulting individual components. The generated curve can…
Attached is an example (ExampleTCSC.pfd) of a Thyristor Controlled Series Capacitor (TCSC) including a control for power oscillation damping (POD) to be used with RMS simulations.…
In the attached example (PhotovBattery.pfd ) two explicit modelling approaches are shown. The models we recommend for PowerFactory simulations are very similar to each other. The PV generator consists…
Tags
For load flow calculation, static analysis, the three phase voltages can only be altered by specifying the amplitude and the phase lag in the positive, negative and zero sequence system of the voltage…
Tags
The IEEE 13 Node Test Feeder is available as an example project within PowerFactory (File menu -> Examples... -> Tab "Examples from Literature"). The IEEE 13 Node Test Feeder is a distribution network…
User-defined controls for Load Flow Calculations as well as Quasi-Dynamic Simulations can be implemented by using QDSL (Quasi-Dynamic Simulation Language) models. In the attached project, two…
Tags