Your search returned 210 items.
User-defined controls for Load Flow Calculations as well as Quasi-Dynamic Simulations can be implemented by using QDSL (Quasi-Dynamic Simulation Language) models. In the attached project, two…
Tags
Depending on the available input data and the kind of study (e.g. steady state, RMS or EMT) different line models (Types) are required and available in PowerFactory. The following models are available…
Current limiting fuses can be modelled in PowerFactory, starting from the version 2025. They are modelled using the already existing fuse model (RelFuse) and fuse type (TypFuse). The effect can only…
Tags
Yes, it is possible to exchange variables between two composite models in the same way as it is done between two DSL models. It is only necessary to set up a frame in which the two frames are inserted…
Refer to the attached example. It describes an induction generator with the necessary dynamic models. The reactive power is balanced using a switched capacitor. The dynamic models are a shaft model…
Tags
You can model the ABC flux by performing an Inverse Clarke transform on the dq0 flux signals as shown in the attached project. Double click on the Flux ABC Virtual Instrument, click Edit, double click…
Tags
A PowerFactory 2018 (and onwards) example along with two papers is provided for your reference. An example of a PowerFactory implementation of a fast voltage controlled based method for converter…
The attached project demonstrates the behaviour of a full-scale converter based system while subjected to an islanding event. The converter is implemented in PowerFactory using a static generator…
The attached PDF gives an overview of the different modelling approaches available in PowerFactory. Please contact support before you start modelling if you are unsure about the best option for your…
In the attached example, a 20Mvar STATCOM provides dynamic reactive power compensation for a set of motors connected to a weak network. The study case "Fault Stability Simulation (RMS)" shows the…
Tags