Your search returned 213 items.
The simulation results are not always on a fixed time base due to interruptions happening during the simulation. The attached project contains a script which uses first the Comtrade export to get a…
The attached example provides a simple network where one single phase static generator (converter) is directly being controlled via DSL to set the output active and reactive power (constant power…
The attached example provides a simple network where one three phase static generator (converter) is directly being controlled via DSL to set the output active and reactive power (constant power…
A periodic pulse signal can be implemented by defining time intervals where the signal is either HIGH (1) or LOW (0), and then repeating the pattern using the modulo operator. Attached, you can find…
The surge arrester model consists of a non-linear resistance that can be entered point by point. The surge arrester is connected to Bus B and the element input characteristic is governed by a current…
The options available are the following: Voltage Measurement Device and Current Measurement Device (StaVmea and StaImea). These elements implement the measurement of time-dependent data of a…
The damping of transient phenomena during a transient simulation is due to 2 causes: Physical damping and numerical damping. - The physical damping is due to the behaviour of the modeled electrical…
Tags
A measurement file object (ElmFile) is used for this purpose. Attached you can find a small example which displays the first 3 channels of a ComTrade file. A measurement file object (ElmFile) is…
The following model provides an example of a long overhead line which is energised via pre-insertion resistors. The overhead line is modeled using a distributed parameters model having the geometry of…
Refer to the attached project which is based on the Transmission example and is focusing on study case "03 Transient Stability". The case reproduces a 100 ms fault event and the post fault recovery…