Your search returned 316 items.
Harmonic load flow calculation and frequency sweep calculations required detailed models of lines that are also representative for higher frequencies. For harmonic analysis, overhead lines and cable…
The transformer impedance is mainly influenced by the series leakage inductance and copper losses for harmonic studies based on Harmonic Load Flow Calculation and Network Impedance Frequency Sweep…
Unlike traditional passive harmonic filters, active harmonic filters reduce the harmonic distortion in the system by cancellation of harmonic current injections. Active harmonic filters inject…
For harmonic analysis in the frequency domain, overhead lines and cables should be modeled based on a distributed parameter line model. Long overhead lines and cables should be modeled with…
Tags
The Cigre waveform is currently not available in the ElmImpulse. However, you can use the current source ElmIac and control it via a DSL model. In the attached project, the DSL model calculates the…
High voltage cable systems sometimes require a detailed analysis of voltages and currents in the core and metallic screen (sheath). In order to analyse both voltages and currents along the cable, the…
There are various possibilities to "bond" the sheath / metallic screen (MSC). The bonding corresponds to the earthing of the sheath / MSC. There are different bonding configurations for cables: …
This example evaluates the flicker coefficients for the various operating conditions specified in Table A.1 - Annex A of the IEC/TR 61000-3-7 (Edition 2.0). Although the intention of this example is…
Please refer to the attached example.…
This example can help you understand the following: - the purpose of the commutation reactance while applying it to the HVDC-LCC element (ElmHvdclcc); nevertheless, the same procedure applies to line…
Tags