Your search returned 224 items.
For load flow calculation, static analysis, the three phase voltages can only be altered by specifying the amplitude and the phase lag in the positive, negative and zero sequence system of the voltage…
Tags
A series reactor can be used to connect buses that operate at different voltage levels. A series reactor is used to model an impedance to connect the different voltage levels (220kV to 230kV). The…
In the attached model, you will find how to model the capacitive and inductive couplings of overhead lines. The example includes study cases that demonstrate: Single line model to study the behaviour…
Tags
In the rectifier model, you can specify a rectifier as either a rectifier with a commutating reactance or just as a rectifier without a commutating reactance. The Technical Reference for the…
Tags
The surge arrester model consists of a non-linear resistance that can be entered point by point. The surge arrester is connected to Bus B and the element input characteristic is governed by a current…
Only the parameters inside the frame (Sub-)Conductor are defined for sub-conductor. All other parameters (e.g. rated current) are specified per bundle. The tower type only specifies overhead line…
Tags
This is possible by using a trick. Enter as the phase of the additional value an angle of phiu: phiu=180 degrees.…
Tags
The following example contains a network model with a cable system modelled in a pipe. The element ElmCabsys is used to model the cable system (TypCabsys) which is composed of single core cables…
The attached example project contains the LCC-HVDC benchmark model. The project includes two study cases, one to study the load flow conditions (LoadFlow Conditions) and a second prepared to perform…
Tags
Start up problems with a system error reporting that api-ms-win-crt-runtime-l1-1-0.dll is missing can be solved by manually installing the Microsoft Universal C Runtime update (Universal CRT). Please…
Tags