Your search returned 189 items.
For RMS simulations the load type has to be set to 100% dynamic load, this means constant impedance Z. Additionally in the RMS dialogue of the load type the voltage dependency of P and Q can be set.…
The attached example shows a single generator infinite bus bar system that goes through three swings before it gets unstable. Power Swing Blocking: The relay is measuring the time of the impedance…
Tags
These are the different Apparent Power variables which can be selected in the flexible data page of a transformer or line. Using the transformer as an example: m:Smax:bushv (Maximum power)…
Tags
The attached example provides a simple network where one single phase static generator (converter) is directly being controlled via DSL to set the output active and reactive power (constant power…
The attached example provides a simple network where one three phase static generator (converter) is directly being controlled via DSL to set the output active and reactive power (constant power…
A PowerFactory 2018 (and onwards) example along with two papers is provided for your reference. An example of a PowerFactory implementation of a fast voltage controlled based method for converter…
The contingency calculation supports also the recording of additional user defined variables. But there is no direct way to display a summary (such as min/max) of these values over all contingencies.…
Tags
The objective is to limit the active power setpoint of a generation unit depending on the voltage measurement at a terminal. For this functionality, a two slightly different QDSL-Models that can be…
Tags
User-defined controls for Load Flow Calculations as well as Quasi-Dynamic Simulations can be implemented by using QDSL (Quasi-Dynamic Simulation Language) models. In the attached project, two…
Tags
A modular implementation of the WECC dynamic composite load model (CMPLDW) is included as a Template in PowerFactory versions 2020, 2021, 2022 and 2023. The latest version of this Template is now…