Your search returned 54 items.
A PowerFactory 2018 (and onwards) example along with two papers is provided for your reference. An example of a PowerFactory implementation of a fast voltage controlled based method for converter…
The attached project demonstrates the behaviour of a full-scale converter based system while subjected to an islanding event. The converter is implemented in PowerFactory using a static generator…
If the option "Current source model: Use negative sequence angle for negative sequence current source" is enabled, the negative sequence angle is either calculated internally or can be defined via the…
In order to create a Bode diagram you will need to use the Model Frequency Response command (ComFreqresp). This command is described within the User manual, section "Frequency Response Analysis",…
An AC voltage source (ElmVac) can be controlled in EMT simulations by means of signals gathered from a measurement file (ElmFile) which specifies the time series for the three phase voltages. For that…
Tags
The attached script allows the direct plotting of selected signals or states from the graphical block definition. Usage is simple: Import the script (best to the projects script folder), mark the…
In general, instantaneous values are calculated in EMT simulations. Such instantaneous values must be processed in order to calculate RMS signals, such as voltages and current. The following are two…
This example provides an introduction to the analysis of arc furnaces and their influence to the supplying power system. The analysis covers the identification of the injected harmonic currents, the…
It is possible to use the results of the Prony Analysis in a DSL model in order to generate a synthetic time domain curve as a summation of all resulting individual components. The generated curve can…
PowerFactory offers with the simulation scan also the possibility to observe the solver. This allows the user to define a parameter simulation scan which can stop the simulation in case of high number…