Your search returned 126 items.
In the attached PowerFactory project, part of a railway transmission network is modelled based on BI-phase technology. The simple network model contains three 110 kV overhead line sections which are…
Tags
The attached example provides a simple network where one single phase static generator (converter) is directly being controlled via DSL to set the output active and reactive power (constant power…
The attached example provides a simple network where one three phase static generator (converter) is directly being controlled via DSL to set the output active and reactive power (constant power…
An example is attached, where the Voltage source is controlled via a DSL block. Three different possibilities are included in the example. Import the project in PowerFactory and run an EMT Simulation.…
Tags
The objective of the attached project is to simulate and analyse the transient recovery voltage (TRV) on high voltage circuit breakers. The circuit breaker itself is modelled by means of a breaker…
Several EMT studies (transformer energisation, load rejection, ferro-resonance etc.) require a detailed model of the non-linear behaviour of the transformer iron core which is defined by its…
Tags
A PowerFactory 2018 (and onwards) example along with two papers is provided for your reference. An example of a PowerFactory implementation of a fast voltage controlled based method for converter…
The attached project demonstrates the behaviour of a full-scale converter based system while subjected to an islanding event. The converter is implemented in PowerFactory using a static generator…
If the option "Current source model: Use negative sequence angle for negative sequence current source" is enabled, the negative sequence angle is either calculated internally or can be defined via the…
Refer to attached project file. The project contains two IEEE 39 bus test systems connected via two long power lines between bus 29 - bus 09 and bus 23 - bus 10. The following study cases are…