Your search returned 126 items.
Variable resistances can be modelled with the ElmSind. The grounding impedance represents a single phase model. Thus, the ElmSind is modelled as single phase element. The single Rin of the ElmSind is…
An example is provided in the project attached. The state machine is implemented in the block definition "StateMachine" and it is based on DSL statements. It represents a generic example of how the…
The following FAQ provides an example of a DSL configuration script for initialisation: …
The example attached provides an example of a PLL capable of tracking a single phase EMT type signal. As such, the example is supporting only EMT type simulations. The PLL model is based on the Second…
Refer to attached project, in which a DSL block definition "PLL DSOGI EMT 3PH" contains this functionality. Along with other phase-locked loop (PLL) topologies, the DSOGI (double second order…
There are many possibilities to configure and use the System Parameter Identification for time domain (RSM/EMT) simulations. In the attached example, the saturated reactance of the transformer model…
Tags
PowerFactory provides the event category Stop Event (EvtStop) to stop a simulation. In order to trigger such an event, a DSL model can used. The DSL model compares the threshold during the simulation…
The attached project shows the energisation of the electrical grid and the active power load pick up with the voltage source converter (VSC) in EMT simulation. The DC capacitor is charged through a…
The ferroresonance phenomena is a non-linear series resonance that may result in transient currents of high amplitude and high harmonic content. For medium voltage networks the following system…
Using element parameter via signals is not possible in DSL but the configuration script, available since V2020, can help you to get the task done. The configuration script is defined in the type…