Your search returned 202 items.
- EMT Simulation The model used permits the direct modification of the ignition angle (alpha). - RMS Simulation This model is slightly different, as the application of a soft starter does not allow a…
The attached example demonstrates the use of stochastic switching in PowerFactory, including a description on how to use it. The study case contains a DPL script "Stochastic Switching" which simulates…
In the attached PowerFactory project, a current source is configured to inject fundamental frequency and harmonic currents into the system. The simple network model contains a current source which is…
Tags
PowerFactory includes built-in devices to measure current (StaImea), voltage (StaVmea) and power (StaPqmea). Since PowerFactory version 2022, these devices calculate the instantaneous values, true RMS…
PowerFactory provides the event category Stop Event (EvtStop) to stop a simulation. In order to trigger such an event, a DSL model can used. The DSL model compares the threshold during the simulation…
Please refer to the attached example.…
Please refer to attached project. The project exemplifies the following systems: - Single phase diode rectifier, full bridge with capacitive load - Single phase diode rectifier, full bridge with…
In order to modify the inductance and resistance of the Series Reactor element within an EMT simulation, then the following signals must be set externally from a user defined model (e.g. DSL or…
Tags
This attached script can be used to compare results within one study case. Execute for this at first manually a simulation. After this change a parameter or event and repeat then the simulation by…
An example is attached, where the Voltage source is controlled via a DSL block. Three different possibilities are included in the example. Import the project in PowerFactory and run an EMT Simulation.…
Tags