Category
Tags
Your search returned 188 items.
An external grid can have different phase impedances modelled by using a line element defined by a tower type. The tower type is configured such that the user can enter the 3x3 impedance matrix. The…
In the attached PowerFactory project, a current source is configured to inject fundamental frequency and harmonic currents into the system. The simple network model contains a current source which is…
Several things are generally worth to keep in mind when executing an EMT simulation with PowerFactory: 1. Necessity of accurate representations of line models. PowerFactory offers lumped as well as…
Tags
A project can be exported via the API by using a ComPfdexport command. This is demonstrated in the following C++ code snippet. Please note that pfd export is only possible if no project is currently…
Tags
The attached project contains a small medium voltage network with four loads of different behaviour. The loads are supplied by a synchronous generator driven by a diesel engine. Additionally there is…
A simple test system is provided in order to analyse using Quasi-Dynamic Simulation the behaviour of a microgrid containing PV systems and a battery system. The network can be configured in order to…
There are several reasons for this error message. It is issued when - at PowerFactory startup - no licence is found. * In case you are using a USB dongle licence, please make sure that the USB dongle…
The number of nodes does vary depending on the specific setup when a calculation is executed. For a given instant, you can check the number of nodes by doing the following: - Have a project and…
The attached project shows all three different possibilities the DSL event command offers. The three loads are disconnected by a DSL model. The event is triggered in this case fixed at 2s via the…
The Thevenin and Norton equivalents are characterized by their open-circuit voltage and short circuit current. The inner voltage source of the Thevenin equivalent equals the open circuit voltage,…