Your search returned 19 items.
Refer to the attached example. In order to understand the interface of the controller with the transformer, the following information needs to be considered: Based on the fact that we consider a…
Tags
Refer to the three attached PowerFactory projects containing a tap changer and shunt control are provided. Direct control via signal:- The project "SIM TapControl nntapin.pfd" shows a tap…
Tags
The attached example project shows three different possibilities to implement automatic voltage regulators (AVR), installed along a line. The most left arrangement uses an auto transformer, where the…
These are the different Apparent Power variables which can be selected in the flexible data page of a transformer or line. Using the transformer as an example: m:Smax:bushv (Maximum power)…
Tags
The loading on an element such as a transformer or line is always based on their current. For a transformer, the loading for each side is calculated from the actual current and the rated current for…
Tags
Several EMT studies (transformer energisation, load rejection, ferro-resonance etc.) require a detailed model of the non-linear behaviour of the transformer iron core which is defined by its…
Tags
There are various possibilities to ground the star point of transformers. Generally, the grounding is defined on the Basic Data page => Grounding / Neutral Conductor. The following options are…
Tags
It is possible to model a center tapped, single phase transformer in PowerFactory for extended distribution networks with long single phase lines. The attached example shows a possible implementation.…
Tags
You may find the simple grid model with two terminals and a power transformer, protected by a differential protection in the attachment of this FAQ. Here, an emphasis is on the way the adapters had…
Tags