Your search returned 122 items.
In the example attached, a Register and a Sample and Hold are included within the model to show their behave. The Sample and Hold stores it's sampled input signal at the output until the next rising…
Tags
Refer to the 2 example projects:The first example 'EvtSwitchExt' shows, how to call a switch event (EvtSwitch) out of a DSL model (general model). In this example the switch events are predefinided in…
If you want to simulate the synchronisation of two different systems, you can model and simulate both systems as separate networks. After some seconds you can then connect them with a circuit breaker…
The attached example includes the VSD_200kW template representing a variable speed drive driving a 200 kW motor. The example provides multiple study cases: SC01 - Motor started (no re-acc) - RMS…
Tags
In the attached example project the battery is connected to the grid using a PWM converter. The grid contains a synchronous machine which supplies a load. After the initialization the synchronous…
The attached example project contains the LCC-HVDC benchmark model. The project includes two study cases, one to study the load flow conditions (LoadFlow Conditions) and a second prepared to perform…
Tags
The attached example shows how an AC current source (ElmIac) is controlled during a RMS simulation. In the first study case the amplitude and the angle of all phases are equally controlled, requiring…
Tags
There are several ways of modelling an SVC system: Using the SVS Interface in PowerFactory: A number of standard controls for SVS are available in the global library. There, you can also find…
Tags
The attached example shows a small industrial grid where1. At 0 seconds the connection to the external grid is opened2. At 1 second the diesel unit is connected to the internal grid. Before it was…
Refer to the attached project. The options shown are: Direct start with star-delta switching: Parameter i_star = 1 (Star), i_star = 0 (Delta) Additional rotor resistance: signal rradd (can…