Your search returned 353 items.
With the short-circuit sweep command it is possible to calculate Short-Circuits along a path.Therefore it is necessary to define a Path (SetPath) and a Short-Circuit Sweep command (ComShcsweep) along…
When entering the data for an external network you should firstly be aware of the meaning of Minimum and Maximum current calculations.The Data for the external grid comprise: The fault level may be…
To change the tap position of a 3-winding transformer during a simulation define a parameter event (EvtParam) using the appropriate variable: e:nntap_int_h which corresponds to the tap-position HV…
This can be defined in the load-flow page of the transformer. The attached example shows how to use a phase-shift transformer to control the active power shared between several transformers…
The best option is to model the TCR using a SVC model and setting the number of capacitors to zero, as shown in attached example. In order to analyze the harmonic distortion of the current…
This can be modelled using a master-slave mode available in PowerFactory. First of all, both transformers shall have a type which includes settings for the tap changer. In addition, the…
Attached you can find an example how to model a line type with 5 wires. The example includes one grid with a 4 wire line type and a separate PE line type, and another grid where the PE line…
Tags
The encrypt module can be applied using the Pack -> Macro button followed by the Encrypt button in the block definition basic data page. The Pack -> Macro option copies all equations to the…
Tags
Yes, it is possible to exchange variables between two composite models in the same way as it is done between two common models. It is only necessary to set up a frame in which the two frames are…
In the attached example a counter is implemented in DSL using the event function. This function creates in this case a parameter event over the same DSL model every time the input signal changes sign…
Tags