Your search returned 382 items.
The slots in the standard frames are predefined slots for the different elements a synchronous machine controller may have, i.e. the element Power System Stabilizer (ElmPss), etc. The names of the…
Although both look very similar, there is an important difference between the frame and the block diagram. The frame does consist of slots and signals connecting them. In the slots only the inputs and…
Tags
The order of the signals defined in a slot and block definition is not relevant for the model. PowerFactory doesn't assign the signals by order, but it does it using the names. Therefore the name is…
Tags
The export to the spreadsheet format uses text files where the columns are separated by tabs.This is a format which is supported by several spreadsheet programs.In tab separated columns it is not…
The damping of transient phenomena during a transient simulation is due to 2 causes: Physical damping or numerical damping. - The physical damping is due to the behaviour of the modeled electrical…
Tags
First of all some general aspects:   The WMF export is a snapshot the current screen configuration (x/y-relation), zooming factor and last, but not least it contains only the selected or all…
In the attached example a test grid is used to shown an example configuration for a FFT (Fast Fourier Transformation) element. The example includes two Composite Models one using a three phase FFT…
PowerFactory is using the rated power of the turbine as an additional input parameter to the turbine model and converts the turbine output (in turbine-p.u.) to synchronous machine p.u. at the output…
Import:DXF files can be used directly as background file for single line diagrams. Open the Graphic Layers dialog and switch to the Configuration page. Select the Background Layer, as Background type…
In general two different options exist:1. An explicit description of the motor driven machine (MDM) is defined.In this case a composite model connects the asynchronous machine with the load…