Your search returned 409 items.
The attached example shows how an AC current source (ElmIac) is controlled during a RMS simulation. In the first study case the amplitude and the angle of all phases are equally controlled, requiring…
The attached example project contains the LCC-HVDC benchmark model. The project includes two study cases, one to study the load flow conditions (LoadFlow Conditions) and a second prepared to perform…
In the attached example project the battery is connected to the grid using a PWM converter. The grid contains a synchronous machine which supplies a load. After the initialization the synchronous…
This is possible by using a trick. Enter as the phase of the additional value an angle of phiu: phiu=180 degrees.…
Firstly, it is considered a transformer that has a tap changer on the HV side, with a voltage source of 100 V on the HV. If the tap is on the position where the primary turns are np=50 then the…
The LDC is normally used in MV/LV radial networks to control the voltage at a remote end (by measuring the load current and compensating the voltage drop). A detailed explanation of the Line Drop…
The attached example shows how to use the PV System. In this example the Solar Calculation is shown. - As a type for the PV System element a PV Panel type is chosen. The rated Peak Power in the Panel…
For the first benchmark model refer to the PowerFactory example found in the application, by clicking in the main menu on File->Examples and changing to the "Examples from…
The A-stable integration algorithm is described in the PowerFactory User Manual, Chapter "Stability and EMT Simulations", Section "Algorithm control".…
Refer to the attached example. In order to understand the interface of the controller with the transformer, the following information needs to be considered: Based on the fact that we consider a…