Your search returned 11 items.
Refer to the attached example. It describes an synchronous generator with wind turbine model and the necessary controllers. The PWM converter models with DC voltage circuits are modeled in detail…
Refer to the attached example. It describes an induction generator with the necessary dynamic models. The reactive power is balanced using a switched capacitor. The dynamic models are a shaft model…
The attached example (WindCpLambda.pfd) visualises the aerodynamic efficiency cp of the wind turbine, which can be found in the DFIG (doubly fed induction generator) template. Here the cp-lambda…
In the attached example (FixedSpeedWTG.pfd) an induction generator with the necessary dynamic models is shown. The reactive power is balanced using a switched capacitor. The dynamic models are a shaft…
A PowerFactory 2018 (and onwards) example along with two papers is provided for your reference. An example of a PowerFactory implementation of a fast voltage controlled based method for converter…
Since version 2017 a new module for scanning the simulation is available. Attached an example how the Fault Ride Through simulation scan can be used. The project contains two study cases, in the first…
The attached document contains a step by step guide for the usage of the script "Wind Speed Sweep" in other projects.…
The Q(V) characteristic is available as reactive power controller for load flow calculation within the generator models as well as within the station controller. The slope of the control curve can be…
The attached project demonstrates the behaviour of a full-scale converter based system while subjected to an islanding event. The converter is implemented in PowerFactory using a static generator…
The IEC standard does not specify explicitly the treatment of renewable energy sources (RES) during shortcircuit (within IEC60909). One procedure in case of full scale converter units (be it wind or…