Your search returned 8 items.
There are two possibilities to work with user defined variables in a dynamic simulation: Using the option ’User Defined Signal’ included within the PltDataseries. This allows calculation of additional…
For PowerFactory 2021 and earlier please refer to this example and attached files. For PowerFactory 2022 and onwards, this example is not supported anymore. Instead, a much easier alternative is…
The AC voltage source can be controlled in RMS simulation by applying different input values to signal sets (u0,f0) or (Ul0,F0Hz). The first set controls the per unit quantities, the second absolute…
Tags
A simple moving average discrete time filter is provided for your reference. It can be used for both RMS and EMT type simulations. The register model (ElmReg) could be used to calculate a moving…
For RMS simulations the load type has to be set to 100% dynamic load, this means constant impedance Z. Additionally in the RMS dialogue of the load type the voltage dependency of P and Q can be set.…
PowerFactory offers with the simulation scan also the possibility to observe the solver. This allows the user to define a parameter simulation scan which can stop the simulation in case of high number…
In order to create a Bode diagram you will need to use the Model Frequency Response command (ComFreqresp). This command is described within the User manual, section "Frequency Response Analysis",…
Refer to attached example. It contains an IBR model and a three-phase fault is simulated in both RMS and EMT. The IBR model can operate in both RMS and EMT, whereas in EMT it can be changed from an…