Your search returned 9 items.
Attached you can a PowerFactory project containing the investigation for VDEW compliance of an asynchronous generator (Example 1) and an inverter-fed synchronous machine (Example 2)…
The slots in the standard frames are predefined slots for the different elements a synchronous machine controller may have, i.e. the element Power System Stabilizer (ElmPss), etc. The names of the…
PowerFactory is using the rated power of the turbine as an additional input parameter to the turbine model and converts the turbine output (in turbine-p.u.) to synchronous machine p.u. at the output…
In the attached example a ramp modeled in DSL is used to reduce the turbine power pt from its initial value to zero. You also may use a similar block structure to impose a ramp on any other machine…
If you want to simulate the synchronisation of two different systems, you can model and simulate both systems as separate networks. After some seconds you can then connect them with a circuit breaker…
In the attached example project the battery is connected to the grid using a PWM converter. The grid contains a synchronous machine which supplies a load. After the initialization the synchronous…
The attached example shows a small industrial grid where1. At 0 seconds the connection to the external grid is opened2. At 1 second the diesel unit is connected to the internal grid. Before it was…
A PowerFactory 2018 (and onwards) example along with two papers is provided for your reference. An example of a PowerFactory implementation of a fast voltage controlled based method for converter…
If the option "Current source model: Use negative sequence angle for negative sequence current source" is enabled, the negative sequence angle is either calculated internally or can be defined via the…