Your search returned 66 items.
A PowerFactory 2018 (and onwards) example along with two papers is provided for your reference. An example of a PowerFactory implementation of a fast voltage controlled based method for converter…
Several EMT studies (transformer energisation, load rejection, ferro-resonance etc.) require a detailed model of the non-linear behaviour of the transformer iron core which is defined by its…
The objective of the attached project is to simulate and analyse the transient recovery voltage (TRV) on high voltage circuit breakers. The circuit breaker itself is modelled by means of a breaker…
Refer to the attached project which is based on the Transmission example and is focusing on study case "03 Transient Stability". The case reproduces a 100 ms fault event and the post fault recovery…
Refer to attached project file. The project contains two IEEE 39 bus test systems connected via two long power lines between bus 29 - bus 09 and bus 23 - bus 10.  The following study cases are…
The attached project demonstrates the behaviour of a full-scale converter based system while subjected to an islanding event. The converter is implemented in PowerFactory using a static generator…
In the provided PowerFactory project, a single phase line-to-ground fault in the middle of an overhead line can be analysed using EMT simulation. The simple network model contains a 110 kV overhead…
It is possible to represent photovoltaic (PV) systems in PowerFactory for the purpose of power system analysis. It is important to decide from the very beginning on the type of analyses being carried…
The attached example shows how measured data in comtrade format can be displayed and replayed. After import: Please select the data folder where you stored the comtrade files (*.cfg and *.dat). Right…
There are many possibilities to configure and use the System Parameter Identification for time domain (RSM/EMT) simulations. In the attached example, the saturated reactance of the transformer model…
Tags