Your search returned 31 items.
In order to create a Bode diagram you will need to use the Model Frequency Response command (ComFreqresp). This command is described within the User manual, section "Frequency Response Analysis",…
The individual phases of the AC voltage source (ElmVac) can be controlled in RMS/EMT simulations. For that purpose, the voltage source (ElmVac) is linked Fourier Sources (ElmFsrc) by a composite…
Tags
In general, instantaneous values are calculated in EMT simulations. Such instantaneous values must be processed in order to calculate RMS signals, such as voltages and current. The following are two…
DSL (DIgSILENT Simulation Language) is a very powerful possibility for modelling time continuous controls and processes. But modelling discrete controls rises some problems. There is on one hand the…
In dynamic simulations, a breaker/switch can be opened via the Switch Event (EvtSwitch). The Switch Event can be parameterised in order to configure the opening process. Furthermore, the breaker…
In dynamic simulations, a breaker/switch can be closed via the Switch Event (EvtSwitch). The Switch Event can be parameterised in order to configure the closing process. Furthermore, the breaker…
This attached script can be used to compare results within one study case. Execute for this at first manually a simulation. After this change a parameter or event and repeat then the simulation by…
PowerFactory offers with the simulation scan also the possibility to observe the solver. This allows the user to define a parameter simulation scan which can stop the simulation in case of high number…
The example shows the application of an SSSC based on a two-level converter for EMT simulation. The grid is composed of two voltage sources and three 110 kV parallel lines. The SSSC is installed at…
During the simulation of an Functional Mock-up Unit (FMU) generated from Matlab Simulink in PowerFactory the simulation start time needs to be set to zero (start time [attribute tstart] in the page…
Tags