Your search returned 7 items.
The Example on arcing voltage of the Circuit-Breaker, in an EMT simulation, can be found in the Switching Transients example within PowerFactory, study case 08 Short-Circuit CB SF6 Arcing Model, with…
DIgSILENT developed an EMT model of a VCB based on [1] (hereafter referred to as Greenwood’s model). Greenwood’s model simulates the voltage recovering characteristic of a VCB after contact separation…
The following model provides an example of a long overhead line which is energised via pre-insertion resistors. The overhead line is modeled using a distributed parameters model having the geometry of…
The objective of the attached project is to simulate and analyse the transient recovery voltage (TRV) on high voltage circuit breakers. The circuit breaker itself is modelled by means of a breaker…
The attached project demonstrates the behaviour of a full-scale converter based system while subjected to an islanding event. The converter is implemented in PowerFactory using a static generator…
In dynamic simulations, a breaker/switch can be opened via the Switch Event (EvtSwitch). The Switch Event can be parameterised in order to configure the opening process. Furthermore, the breaker…
In dynamic simulations, a breaker/switch can be closed via the Switch Event (EvtSwitch). The Switch Event can be parameterised in order to configure the closing process. Furthermore, the breaker…