Your search returned 60 items.
There are three ways of modelling an SVC system: Using the SVS Interface in PowerFactory. There are a number of standard controls for SVS in the library that can be used. You will also find two…
The attached example shows how an AC current source (ElmIac) is controlled during a RMS simulation. In the first study case the amplitude and the angle of all phases are equally controlled, requiring…
Refer to the attached example. In order to understand the interface of the controller with the transformer, the following information needs to be considered: Based on the fact that we consider a…
A simple moving average discrete time filter is provided for your reference. It can be used for both RMS and EMT type simulations. The register model (ElmReg) could be used to calculate a moving…
The Matlab Simulink - PowerFactory simulation interface is described in detail in the User Manual, Chapter "Models For Dynamic Simulations", Section "Matlab Interface". A simple Simulink Model…
Refer to the 2 example projects:The first example 'EvtSwitchExt' shows, how to call a switch event (EvtSwitch) out of a DSL model (general model). In this example the switch events are predefinided in…
In the example attached, a Register and a Sample and Hold are included within the model to show their behave. The Sample and Hold stores it's sampled input signal at the output until the next rising…
Tags
In the attached example a ramp modeled in DSL is used to reduce the turbine power pt from its initial value to zero. You also may use a similar block structure to impose a ramp on any other machine…
There are two possibilities to work with user defined variables in a dynamic simulation: 1. Using the option ’User Defined Signal’ included within the VisPlot. This allows calculation of additional…
You will need to perform an EMT-type simulation for this purpose. To replicate the fault on the cable insulation, the cable must be explictly divided in two sections at the point where the faulty…