Your search returned 57 items.
A lightning event can be modelled in PowerFactory in two ways: using the built-in impulse source element (ElmImpulse) - recommended approach. using a detailed, user defined DSL model. The first method…
Tags
The attached example demonstrates the use of stochastic switching in PowerFactory, including a description on how to use it. The study case contains a DPL script "Stochastic Switching" which…
To model the initial conditions (voltage) of a capacitor bank, you should use a "parameter event" (SetParam) on the variables "uC_a", "uC_b", "uC_c" (signals of the "ElmShnt"). Please find attached an…
To define harmonic background voltages you have to link a voltage source with a DSL model or a fourier source. Refer to the example in the attached file.…
A measurement file object (ElmFile) is used for this purpose. Attached you can find a small example which displays the first 3 channels of a ComTrade file. A measurement file object (ElmFile) is…
The Example on arcing voltage of the Circuit-Breaker, in an EMT simulation, can be found in the Switching Transients example within PowerFactory, study case 08 Short-Circuit CB SF6 Arcing Model, with…
Refer to the attached example. It describes an induction generator with the necessary dynamic models. The reactive power is balanced using a switched capacitor. The dynamic models are a shaft model…
Tags
In the attached PowerFactory project, a current source is configured to inject fundamental frequency and harmonic currents into the system. The simple network model contains a current source which is…
Tags
Several things are generally worth to keep in mind when executing an EMT simulation with PowerFactory: 1. Necessity of accurate representations of line models. PowerFactory offers lumped as well as…
Tags
For PowerFactory 2021 and earlier please refer to this example and attached files. For PowerFactory 2022 and onwards, this example is not supported anymore. Instead, a much easier alternative is…