Your search returned 412 items.
Refer to the 2 example projects:The first example 'EvtSwitchExt' shows, how to call a switch event (EvtSwitch) out of a DSL model (general model). In this example the switch events are predefinided in…
In the example attached, a Register and a Sample and Hold are included within the model to show their behave. The Sample and Hold stores it's sampled input signal at the output until the next rising…
Tags
In the attached example a ramp modeled in DSL is used to reduce the turbine power pt from its initial value to zero. You also may use a similar block structure to impose a ramp on any other machine…
- EMT SimulationThe model used permits the direct modification of the ignition angle (alpha).- RMS SimulationThis model is slightly different, as the application of a soft starter does not allow a…
There are two possibilities to work with user defined variables in a dynamic simulation: 1. Using the option ’User Defined Signal’ included within the VisPlot. This allows calculation of additional…
You will need to perform an EMT-type simulation for this purpose. To replicate the fault on the cable insulation, the cable must be explictly divided in two sections at the point where the faulty…
In the attached example the output power of a single phase load is controlled via an external file element (ElmFile). Import the project, save the text file to the hard disk and select this file in…
In general two different options exist:1. An explicit description of the motor driven machine (MDM) is defined.In this case a composite model connects the asynchronous machine with the load…
Import:DXF files can be used directly as background file for single line diagrams. Open the Graphic Layers dialog and switch to the Configuration page. Select the Background Layer, as Background type…
An external grid can have different phase impedances modelled by using a line element defined by a tower type. The tower type is configured such that the user can enter the 3x3…