Your search returned 386 items.
There is no build in function to jump from one activation time of an expansion stage (of an active variation) to another. But it can be done by a script. There are two scripts (the only difference is…
To be able to create a plot from values that are saved inside a vector object (VisVec) you first need to define and fill a result file (ElmRes) with values from a vector of interest. The easiest way…
Tags
In order to plot values of a variable that was used in a DPL or Python script you first need to save the variable's values into a result file (ElmRes). For this define a result parameter on the…
Tags
The Thevenin and Norton equivalents are characterized by their open-circuit voltage and short circuit current. The inner voltage source of the Thevenin equivalent equals the open circuit voltage,…
An example is attached, where the Voltage source is controlled via a DSL block. Three different possibilities are included in the example. Import the project in PowerFactory and run an EMT Simulation.…
In order to run PowerFactory, a Licence Service that is called CodeMeter needs be installed on a Windows based machine (refer to this link for supported Operating Systems). For Single-User Editions of…
Copying the entire operational data from one scenario to another can be done very easily by activating the target scenario then using right-click, Apply on the source scenario. This copying process…
It is possible. For this task, you will have to define a new relay. This relay will represent the connection between relays of interest.   In attached project, you will find two distance relays…
Refer to attached project file. The project contains two IEEE 39 bus test systems connected via two long power lines between bus 29 - bus 09 and bus 23 - bus 10.  The following study cases are…
Refer to the attached project which is based on the Transmission example and is focusing on study case "03 Transient Stability". The case reproduces a 100 ms fault event and the post fault recovery…